Verizon Delphi Connect Uživatelská příručka Strana 1

Procházejte online nebo si stáhněte Uživatelská příručka pro Elektronika motorových vozidel Verizon Delphi Connect. Verizon Delphi Connect User guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 575
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
User Guide
Delphi Connect 4G LTE
Zobrazit stránku 0
1 2 3 4 5 6 ... 574 575

Shrnutí obsahu

Strany 1 - User Guide

User GuideDelphi Connect 4G LTE

Strany 2 - Table Of Contents

10Understanding the Status LED Indicators ...558Troubles

Strany 3

100Clearing Diagnostic CodesYou can choose to clear the codes from either your display or from from your vehicle. If you clear the codes from your dis

Strany 4

101To begin clearing codes, tap the soft menu at the bottom of the screen. Then tap Clear trouble codes

Strany 5

102Tap Display only to clear the codes from your display, tap Vehicle to clear the codes from your vehicle, or tap Cancel to exit.

Strany 6

103Recent TripsThe Recent Trips feature records all the trips the vehicle has taken since you installed the module. Within the smartphone app, you ca

Strany 7

104The trip details include total distance, start date and time, start location, end date and time, end location, and the amount of time the engine wa

Strany 8

105Use the map control tools (on page 49) to scroll and zoom the map, or turn on Satellite view.Note: During trips, the location of the vehicle is log

Strany 9

106Key Fob PairingThe key fob setup process has two main steps, configuring your module for your vehicle and pairing your module with your vehicle. You

Strany 10

107To enable your keyfob feature: 1. Navigate to the Key Fob feature which is accessible from the Side Menu. Tap OK to begin the fob setup proce

Strany 11

1082. Using the Prev and Next buttons, look for the key fob picture that matches yours. Once you have found your key fob, tap Continue. If you d

Strany 12 - Is My Vehicle Compatible?

1094. When complete, the following screen will be displayed and you will need to be in the vehicle to perform the final key fob setup steps. If y

Strany 13 - Package Contents

11WelcomeYou are about to experience a powerful device that will deliver a new level of convenience and peace of mind with your vehicle. When combined

Strany 14 - Installation Requirements

110Key Fob Pairing Without VIN1. To enable your keyfob feature without a vehicle VIN, navigate to the Key Fob feature which is accessible from t

Strany 15

1112. Use the on screen prompts to select your vehicle and tap Submit. If are not able to select your vehicle, tap “My vehicle is not listed” an

Strany 16 - Password:

1124. When complete, the following screen will be displayed and you will need to be in the vehicle to perform the final key fob setup steps. If y

Strany 17 - On iPhone:

113Following the successful pairing of your Key Fob, you should be able to use your Delphi Connected Car app to send key fob commands over the Verizo

Strany 18

114To pair your Smartphone with the module Bluetooth Direct Connect follow the steps below:1. Access the Delphi Connect Car app side menu by tapping t

Strany 19

1153. Tap the vehicle in which the module is currently installed.4. Tap Bluetooth Settings.5. Tap Discover to activate Bluetooth® pairing.

Strany 20

1166. The Status LED on your module should begin flashing blue.7. Press your phone’s Home button and follow the procedures for turning on your smartpho

Strany 21

1173. Tap your phone’s name.4. Tap Authorize to enable your phone to provide key fob control over Bluetooth®. Your phone will now show as authorize

Strany 22

1185. Tap Delphi menu icon until you return to the Delphi Connect side menu.6. Observe the LED on the module and wait until it returns to flashing blue

Strany 23

119Remove the Bluetooth Connection to Your ModuleYou can remove the Bluetooth connection between your phone and your module.1. Access the Delphi Conn

Strany 24

12Is My Vehicle Compatible?The Delphi Connect module works with most 1996 and newer vehicles (cars, light trucks, SUVs and minivans) sold in the Unite

Strany 25

1203. Tap Vehicle Settings.

Strany 26

1214. Tap the vehicle in which the module is currently installed.

Strany 27

1225. Tap Bluetooth Settings.

Strany 28

1236. Tap the name of the device you wish to remove.

Strany 29 - include a number

1247. Tap Unauthorize and then tap Unpair to remove the pairing for this device. The device will be removed from the list.Note: Remember to unpa

Strany 30

125SettingsThe Settings menu provides access to your Account Settings, Vehicle Settings, your personal PIN-code, and additional information in the Abo

Strany 31

126Account SettingsThe Account Settings allow you to:• Modify your User Settings, including login credentials, account email address, language for

Strany 32 - the unlisted vehicle

127User SettingsAccount Email Address The account is used to communicate information regarding your connected car account, for example, it is used for

Strany 33

128Edit or Delete Account Email AddressTo edit or delete the account email address:On the side menu tap Settings, then Account Settings then User Sett

Strany 34 - OBD LOCATOR

129Enter your new account email address or delete the current one by clearing the field. Tap Save Settings to save the email address or tap the Back bu

Strany 35

13• Delphi Connect Module• Get to Know Your Device Guide• Product Safety and Warranty GuideIf anything is missing, please contact Verizon Wireless Cus

Strany 36

130Change UsernameOn the side menu tap Settings, then Account Settings then User Settings then tap Username.

Strany 37

131Usernames must be at least one character long, can include letters, numbers and special characters. The username may be composed only of letters,

Strany 38 - Reconnect Your Module

132Change PasswordOn the side menu tap Settings, then Account Settings then User Settings then tap Password.

Strany 39

133You must enter the same password twice in order to change it. Passwords must be at least six characters long and include at least one number. Passw

Strany 40

134Vehicle Nicknames and DescriptionsYou can assign a nickname and a description to each vehicle. If defined, the nickname will be displayed instead of

Strany 41

135Modify Vehicle NicknameOn the side menu tap Settings, then vehicle settings, then tap the vehicle you wish to modify.

Strany 42

136Tap on Nickname to edit the vehicle nickname.

Strany 43 - Tap Forgot Password

137Enter the desired nickname and press Save to save the nickname.Note: If you delete the nickname, the vehicle year and model will again be displayed

Strany 44

138Modify Vehicle DescriptionOn the side menu tap Settings, then vehicle settings, then tap the vehicle you wish to modify.

Strany 45

139Tap on Description to edit the vehicle description.

Strany 46

14System RequirementsThe Delphi Connect smartphone app works on:• Android 2.2 and later• Apple iOS 5.0 and laterThe Delphi website at mycar.delphi.c

Strany 47

140Enter the desired description and press Save to save the description.Note: If you delete the description, the vehicle VIN will again be displayed.

Strany 48

141Select Notification LanguageThe notification language setting allows you to receive your alert notifications, both email and txt messages, in any of t

Strany 49

142Tap Notification Language and select the desired language from the drop down list. Tap Save to save your selection.

Strany 50

143Select Unit of MeasureThe unit of measure setting allows you to view your data in either Imperial units, such as miles and mph, or metric units, su

Strany 51

144Tap Units of Measure and select desired system of measurement from the drop down list. Tap Save to save your selection.

Strany 52

145Module ManagementModule Management allows you to:• View the modules associated with your account• Add modules to your account• Remove modules from

Strany 53

146Add a Module to Your Account1. On the side menu tap Settings, then Account Settings then Module Management.

Strany 54

1472. Tap Add Module

Strany 55

1483. Enter the ESN or IMEI and the device Registration Key exactly as they are printed on the module label — including the dash in the Registra

Strany 56

1494. If the module is still associated with another account, you will also need to enter the Username and Password of that account then tap Add.

Strany 57

15First-Time Setup Using Smartphone AppDownload Delphi Connect Smartphone App1. Launch your smartphone’s app store—either Google Play Store for Androi

Strany 58

150Note: Any vehicle data in the previous account will not be transferred to the new account. Once added to the new account, all vehicle data reported

Strany 59

1512. Tap the ESN or IMEI number of the module you want to remove.

Strany 60

1523. Review the on-screen information matches the Module you want to remove and tap Delete Module.Note: Removing a Module from your account doe

Strany 61

153Vehicle SettingsThe Vehicle Settings allow you to:• Review and edit your vehicle information, such as providing your vehicle VIN when the VIN is

Strany 62

1542. Tap the vehicle you wish to review.

Strany 63

155Edit Your Vehicle InformationIf your vehicle did not report a VIN, you can enter the VIN or information about your vehicle yourself.1. To edit your

Strany 64

1562. Tap the vehicle you wish to review and then tap Edit.

Strany 65

1573. You can enter either the VIN from your vehicle or you can enter the vehicle make, model and model year. Tap the circle next to the info

Strany 66

1584. Enter the VIN or use the drop-down menus to select your vehicle’s make, model and model year.5. Tap Save to save your changes or back to

Strany 67 - the previous boundaries

159Configuring AlertsThe Alerts & Notifications settings allow you to customize some of the alerts available to you. All alerts will be stored in yo

Strany 68

163. If you purchased model ACT233L with the WiFi hotspot, the WiFi hotspot SSID and Password are located on the product label. The SSID is the netwo

Strany 69

1602. Tap the vehicle you wish to configure.

Strany 70 - Geo-Fences

1613. Tap Alerts & Notifications.

Strany 71

1624. Tap Geofence.

Strany 72

1635. To disable a specific Geo-Fence, tap the ON/OFF slider next to the Geo-Fence name. To re-enable the Geo-Fence tap the ON/OFF sl

Strany 73 - glass)

1646. Tap the Geo-Fence name to configure the entry and exit alerts individually.

Strany 74

1657. To disable the entry alert, uncheck the box next to the words Trigger When Entered. To disable the exit alert, uncheck the box next to the

Strany 75

166Configuring the Speed Alert1. Tap Settings from the side menu then tap Vehicle Settings.

Strany 76

1672. Tap the vehicle you wish to configure.

Strany 77

1683. Tap Alerts & Notifications.

Strany 78

1694. To disable the speed alert, tap the ON/OFF slider to the right of the word Speed. The slider will change from ON to OFF. To re-enable the

Strany 79

17On iPhone:

Strany 80

1705. Tap the word Speed to configure the speed threshold.

Strany 81

1716. Enter the speed in miles per hour that you want to trigger the speed alert. That is, when the vehicle is driven at this speed or higher fo

Strany 82

172Configuring the Motion Alert1. Tap Settings from the side menu then tap Vehicle Settings.

Strany 83

1732. Tap the vehicle you wish to configure.

Strany 84

1743. Tap Alerts & Notifications.

Strany 85

1754. To disable the motion alert, tap the ON/OFF slider to the right of the word Speed. The slider will change from ON to OFF. To re-enable the

Strany 86

1765. Tap the word Motion to configure the motion threshold.

Strany 87

1776. Enter the threshold in G-forces that you want to trigger the motion alert. That is, once the ignition of off for 10 minutes and the vehicle expe

Strany 88

178Configuring the Engine RPM Alert1. Tap Settings from the side menu then tap Vehicle Settings.

Strany 89

1792. Tap the vehicle you wish to configure.

Strany 90

185. When prompted, change your Username and Password, to something easy to remember but difficult for other people to guess. Passwords must be a

Strany 91

1803. Tap Alerts & Notifications.

Strany 92

1814. To disable the engine RPM alert, tap the ON/OFF slider to the right of the words Engine RPM. The slider will change from ON to OFF. To re-e

Strany 93

1825. Tap the words Engine RPM to configure the RPM threshold.

Strany 94

1836. Enter the engine RPM threshold in revolutions per minute and the minimum time required in seconds that you want to trigger the engine RPM a

Strany 95

184Configuring NotificationsFor each alert, you can configure email and text notifications that will be sent when the alert occurs. This includes the abi

Strany 96

185Add a NotificationYou can add an email and text (SMS) notification to any alert. The process is similar for all alerts, here is how to add notificatio

Strany 97

1862. Tap the vehicle you wish to configure.

Strany 98

1873. Tap Alerts & Notifications.

Strany 99

1884. Tap the word Speed to configure the notifications.

Strany 100

1895. Tap Add Email at the bottom of the screen. If you do not see the button Add Email, tap the small down arrow to right of the word Notificatio

Strany 101

196. You will see the following screen after successfully changing your username and password.7. Now you’re ready to install the module in your vehicl

Strany 102

1906. Tap Add Notification

Strany 103

1917. To send a notifcation to an email address, select the email address icon and enter a valid email address in the format [email protected].

Strany 104

1928. To send a text notification to a mobile number, select the mobile number icon enter a valid 10 digit mobile number in the format 1112223333

Strany 105

193Modify or Delete a NotificationYou can delete a notification associated with any alert. The process is similar for all alerts, here is how to delete

Strany 106

1942. Tap the vehicle you wish to configure.

Strany 107

1953. Tap Alerts & Notifications.

Strany 108

1964. Tap the word Speed to configure the notifications.

Strany 109

1975. If you do not see the notification email addresses or mobile numbers displayed on the screen, tap the small down arrow to right of the wor

Strany 110 - Key Fob Pairing Without VIN

1986. To delete a notification email address or mobile number, tap the x next to the email address or mobile number you want to delete. 7. Tap Sa

Strany 111

199Wi-Fi HotspotModel ACT233L of the Delphi Connect system offers you a mobile hotspot in your vehicle. The hotspot is enabled whenever the engine is

Strany 112

2Welcome ...

Strany 113

20Find Your Vehicle’s OBD Connector PortThe OBD connector is usually located on or under the dash, on the driver’s side. Other possible locations are

Strany 114

200Tap Network Name to change the network name (SSID). This is the name that users will see when scanning for wireless networks on their devices. Ente

Strany 115 - 4. Tap Bluetooth Settings

201Configure the Network PasswordFrom the Settings menu, tap Account Settings, Module Management, then tap the module you wish to configure. Tap on Wi-F

Strany 116

202Tap Password to change the network password. Enter the new password in both boxes. The Wi-Fi password must be between 8 and 63 characters. Tap Sav

Strany 117 - 3. Tap your phone’s name

203Configure the Hotspot TimeoutsThe hotspot can be configured to remain on after the engine has been turned off. When the engine is turned off, the hot

Strany 118 - Bluetooth® setup is complete

204Tap the box indicating the Shut Off Time and Force Shut Off Time. Using the drop down menus, tap the desired time settings. Tap Save Settings to sa

Strany 119

205View Connected DevicesFrom the Settings menu, tap Account Settings, Module Management, then tap the module you wish to configure. Tap Connected Devi

Strany 120 - 3. Tap Vehicle Settings

206Wi-Fi Administrator Portal AccessYou can log in to the Wi-Fi hotspot using an administrator account while connected to the hotspot. The administrat

Strany 121

207In order to view or modify any of the hotspot settings, you will need to sign in as the administra-tor. You can click the Sign In link in the upper

Strany 122 - 5. Tap Bluetooth Settings

208View Hotspot Data Usage1. Log into the hotspot administrator portal. 2. Click Data Usage.

Strany 123

209View, Block and Unblock Connected Devices1. Log into the hotspot administrator portal. 2. Click on Connected Devices. To block a specific device fro

Strany 124 - removed from the list

214. You will see a picture of the location of your OBD II connector.Note: If needed, you can access the OBD Locator from the smartphone app or websit

Strany 125 - Settings

210Modify Administrator Password1. Log into the hotspot administrator portal.2. Click Hostpot Settings. Click the Hotspot tab. Click the Admin Passwor

Strany 126 - Account Settings

211Modify Hotspot TimeoutThe hotspot can be configured to remain on after the engine has been turned off. When the engine is turned off, the hotspot wi

Strany 127 - User Settings

212Backup and Restore Hotspot SettingsSettings1. Log into the hotspot administrator portal.2. Click on Hostpot Settings. Click the Hotspot tab. Click

Strany 128

213Modify Basic Hotspot SettingsThe Wi-Fi hotspot settings allow you to configure the following settings:- Wi-Fi network name (SSID), name used by devi

Strany 129

2143. Edit the hotspot settings. 4. Click Save Changes.Modify Advanced Hotspot SettingsThe advanced hotspot settings allow you to configure the followi

Strany 130 - Change Username

2153. A warning message will be displayed. Click Go Back to exit Advanced Settings or click Continue.4. Click on Firewall to modify the firewall s

Strany 131

2165. Click on LAN to modify the LAN settings. Enter the desired IPv4 and IPv6 settings. Click Save Changes.6. Click on Port Filtering to modify the p

Strany 132 - Change Password

217View Hotspot Support InformationThe hotspot provides status and diagnostic information as well as links to support services.1. Log into the hotspot

Strany 133

2183. To view the model and versions of the hotspot, click on About Delphi Connect. Click the Info tab.

Strany 134

2194. To view diagnostic information about the hotspot, click About Delphi Connect. Click on the Diagnostics tab.

Strany 135 - Modify Vehicle Nickname

22Install Your Module1. Use your Verizon Wireless smartphone to check that you have a strong signal where your vehicle is parked. Don’t have Verizon c

Strany 136

2205. To manage hotspot log files, click About Delphi Connect. Click on the Logs tab. To enable recording hotspot logs, check Enable Logs. Select

Strany 137

2216. To view available support links, click About Delphi Connect. Click on the Help & Support tab.

Strany 138 - Modify Vehicle Description

222Personal PIN-CodeFor added security, you can create a personal PIN-code. Once created, the PIN must be entered each time you access the app except

Strany 139

223Enter a 4 digit PIN. You will be asked to re-enter the 4 digit PIN for confirmation.

Strany 140

224The PIN-code will now show ON.

Strany 141

225Disable Personal PIN-CodeOn the side menu tap Settings, then PIN-code.

Strany 142

226Enter your 4 digit PIN.

Strany 143

227The PIN-code will now show OFF.

Strany 144 - Save to save your selection

228About SectionThe About section allows you to:• Access the OBD Locator• Review the current Privacy Policy and Terms of UseLocating Your OBD Connecto

Strany 145 - Module Management

2292. Tap About and then tap OBD Locator.

Strany 146 - Add a Module to Your Account

23Note: To avoid any unnecessary drain on the vehicle battery, it is recommended to not leave the module in the solid blue state for more than 24 hour

Strany 147 - 2. Tap Add Module

230Reviewing the Terms of Use and Privacy Policy1. To review the Terms of Use and Privacy Policy, on the side menu tap Settings.

Strany 148

2312. Tap About and then tap the document you wish to review.

Strany 149

232LogoutOn the Side Menu of the app, tap Logout to logout from your vehicle. This will return you to the login screen. Note: The Delphi Connect smart

Strany 150

233Using the iPhone AppForgot Username or PasswordShould you forget your account login credentials, you can request your username or a password reset

Strany 151

234Tap Forgot Username.Enter the account email address you provided in your User Settings and tap Submit.

Strany 152 - Module

235You will receive an email with your Username sent to the account email address you provided as part of your User Settings. If you did not provide a

Strany 153 - Vehicle Settings

236Tap Forgot Password.Enter your Username and tap Submit. You will receive an email providing you a temporary password sent to the account email add

Strany 154

237Navigating AroundTo navigate to a specific category, tap the item you want to view, such as Alerts, Recent Trips, Health and Location (as shown in t

Strany 155

238• From the Side Menu, you can navigate to any of the Delphi Connect features. • Open the Settings feature to modify account information, manage you

Strany 156

239Refreshing Your Vehicle DataThe Delphi Connect system will update your vehicle information as it becomes available. This may cause the display to c

Strany 157

24Verify Module Setup1. Start the engine and let it run for at least 30 seconds.2. Stop the engine and wait at least 20 seconds. 3. You are now ready

Strany 158 - year

240Selecting Your VehicleIf you have more than one module associated with your account, you can select which vehicle’s information to view. Tap the ve

Strany 159 - Configuring Alerts

241DashboardThe Dashboard provides a summary of your vehicle status.It includes the following information:• Basic vehicle information including the en

Strany 160

242• Last recorded Location of vehicle:• The most recent alerts:• The most recent health information reported by your vehicle:Note: You will only see

Strany 161

243• The most recent trips:

Strany 162 - 4. Tap Geofence

244LocationUse the Location feature to locate your vehicles at any time. The location screen indicates the last recorded vehicle locations. The curren

Strany 163

245Tap on a vehicle marker to select it and display additional information such as the address and the latitude and longitude. The marker of the selec

Strany 164

246If you have selected a vehicle to show on the map and the location is unknown, a message will be displayed at the top of the map indicating how man

Strany 165

247Hide/Show Vehicles on the Location MapOn the location screen, you can select which of your vehicles you wish to display on the map using the Hide o

Strany 166 - Configuring the Speed Alert

248Check the vehicles you wish to show in the location map. You cannot uncheck the current vehicle. Tap Select Current Vehicle Only to display only th

Strany 167

249Map ViewThe Map view can be customized using the map controls. You can use the standard Apple map controls, such as scrolling and zooming to adjust

Strany 168

25• If not, tap the Retry button.• If you still do not see the Dashboard screen, go to the Troubleshooting section of this guide.

Strany 169

250View Geo-FencesTo enable and disable the display of Geo-Fences, tap the Show Geo-Fences switch on the location menu. You will see the geo-fences as

Strany 170

251Find My Car Tap the Zoom to Vehicle button to center the map on the current vehicle’s location.

Strany 171

252Find All My Cars On the location menu, tap the Zoom to All Vehicles button to resize the map to show all vehicles selected for display.

Strany 172 - Configuring the Motion Alert

253Navigate To VehicleIf the GPS is enabled on your smartphone, you can have your default navigation app provide directions from your location to your

Strany 173

254Programmable OdometerA programmable odometer is provided for your vehicle. You can set it to your vehicle’s odometer to track total mileage or you

Strany 174

255Enter the desired value in miles. Tap Save to save the value or tap back to exit without saving.

Strany 175

256Managing Geo-FencesA geo-fence allows you to define a location that is of interest to you and create a boundary around it. When your vehicle crosses

Strany 176

2572. Tap CREATE NEW FENCE.3. Select the desired geo-fence shape, circle or rectangle. You can change the shape at anytime.

Strany 177

2584. Scroll and zoom the map to where you would like to place the Geo-Fence. The cross-hairs indicate the center of the geo-fence.5. To resize

Strany 178

2596. Tap Save to save your geo-fence or the back arrow to cancel creating the geo-fence.

Strany 179

26Verify Wi-fi HotspotStop! Do not proceed until you have successfully completed Step 6: Verify Module Setup and verified proper functioning of the modu

Strany 180

2607. Enter the name of the new geo-fence and tap Save, or tap the back arrow to exit without saving.8. Create additional Geo-Fences if desired.

Strany 181 - slider again

2619. Tap the back arrow when you are done.

Strany 182

262Create a Geo-Fence by Searching for an Address or Business Name1. Open the location menu by tapping the information icon. Tap Add or Edit Geo-fence

Strany 183

2632. Tap CREATE NEW FENCE.

Strany 184 - Configuring Notifications

2643. In the search bar (located at the top of the map), enter the address or business name you want to find and tap Search.

Strany 185

2654. Select the desired location from the list of results. You can modify your search criteria and search again.

Strany 186

2665. Select the desired geo-fence shape, circle or rectangle. You can change the shape at anytime.

Strany 187

2676. Scroll and zoom the map to where you would like to place the Geo-Fence. The cross-hairs indicate the center of the geo-fence.7. To resize

Strany 188

2688. Tap Save to save your geo-fence.

Strany 189

2699. The search text you used will be automatically entered as the geo-fence name. If desired, edit the geo-fence name and tap Save, or tap the

Strany 190 - 6. Tap Add Notification

27First-Time Setup Using Delphi Connect WebsiteLaunch Your Internet BrowserUse your website browser and go to mycar.delphi.com.Sign In to Your Delphi

Strany 191

270Edit an Existing Geo-Fence1. Open the location menu by tapping the information icon. Tap Add or Edit Geo-Fence.

Strany 192 - numbers as you wish

2712. Tap on the name of the Geo-Fence you want to edit.

Strany 193

2723. Select the desired geo-fence shape, circle or rectangle. You can change the shape at anytime.

Strany 194

2734. Scroll and zoom the map to where you would like to place the geo-fence. The cross-hairs indicate the center of the geo-fence.5. To resize

Strany 195

2746. Tap the Save icon (upper right hand corner) to save your geo-fence.7. Edit the name of the new geo-fence if needed and tap OK, or tap the back a

Strany 196

275Delete an Existing Geo-Fence1. Open the location menu by tapping the information icon. Tap Add or Edit Geo-Fence.

Strany 197 - section

2762. Tap the name of the geo-fence you want to delete.

Strany 198 - saving your changes

2773. Tap Delete, then tap Yes to delete or No to exit without deleting.

Strany 199 - Wi-Fi Hotspot

278Enable or Disable a Geo-Fence1. Open the location menu by tapping the information icon. Tap Add or Edit Geo-Fence.

Strany 200

2792. In the Geo-Fence settings panel, to disable the geo-fence, uncheck the box to the left of the Geo-Fence you wish to disable. This will not de

Strany 201 - Configure the Network Password

283. Review and select ACCEPT to accept the privacy statement and terms of use.3. If you purchased model ACT233L with the WiFi hotspot, the WiFi hotsp

Strany 202

2801. Open the location menu by tapping the information icon. Toggle the Live Tracking switch to start live tracking. Tap it again to turn off live tr

Strany 203

2812. You will be see a warning message with a reminder of the 10-minute timeout. To continue, tap Accept. To exit live tracking, tap Cancel.

Strany 204

2823. During Live Tracking, the vehicle marker will turn red. The vehicle’s current speed as well as the live tracking timer will be shown in an infor

Strany 205 - View Connected Devices

283• The battery voltage falls below 11.5 volts• While the engine is not running and the vehicle experiences a motion that exceeds a threshold that

Strany 206

284To clear alerts, tap the box next to the alerts you wish to clear and select Clear. The smartphoneapp only displays the most recent alerts, you may

Strany 207

285You will need to confirm that you wish to clear the selected alerts. Tap OK to confirm, or tap Cancel to exit.

Strany 208 - 2. Click Data Usage

286You can scroll to view all of the reported diagnostic codes. The most recent codes are listed first. To view all codes, login to your online account

Strany 209

287Performing a Diagnostic Code Scan on Your VehicleTo begin a diagnostic scan, tap the Refresh button labeled Perform trouble code scanYou will see

Strany 210

288Clearing Diagnostic CodesYou can choose to clear the codes from either your display or from from your vehicle. If you clear the codes from your dis

Strany 211

289Tap Clear Display to clear the codes from your display, tap Clear Vehicle to clear the codes from your vehicle, or tap Cancel to exit.

Strany 212

294. When prompted, change your Username and Password to something easy to remember but difficult for other people to guess. Passwords must be at lea

Strany 213

290Recent TripsThe Recent Trips feature records all the trips the vehicle has taken since you installed the module. Within the smartphone app, you can

Strany 214

291The trip details include total distance, start date and time, start location, end date and time, end location, and the amount of time the engine wa

Strany 215

292Use the map control tools to scroll and zoom the map, or turn on Satellite view.Note: During trips, the location of the vehicle is logged every min

Strany 216

293Key Fob PairingThe key fob setup process has two main steps, configuring your module for your vehicle and pairing your module with your vehicle. You

Strany 217

294Before attempting the key fob setup process, look on your dashboard view to see if your vehicle’s VIN has been identified. If the module was able to

Strany 218 - tab

295To enable your keyfob feature:1. Navigate to the Key Fob feature which is accessible from the Side Menu. Tap OK to begin the fob setup process or

Strany 219 - Diagnostics tab

2962. Using the Prev and Next buttons, look for the key fob picture that matches your key fob. Once you have found your key fob, tap Continue. If

Strany 220

2973. Once you have tapped Continue, you will see the following message while your key fob is being initialized. The configuration step can take up to

Strany 221

2984. When complete, the following screen will be displayed and you will need to be in the vehicle to perform the final key fob setup steps. If y

Strany 222

2995. Once in the vehicle, tap Continue. Carefully follow the on screen instructions. You may be required to push buttons in your vehicle such as th

Strany 223

3 Location ...

Strany 224

306. Now you’re ready to install the module in your vehicle.Note: The website will automatically log you out after 20 minutes of inactivity, unless yo

Strany 225 - Disable Personal PIN-Code

300Key Fob Pairing Without VIN1. To enable your key fob feature, navigate to the Key Fob feature which is accessible from the Side Menu. If your ke

Strany 226 - Enter your 4 digit PIN

3012. Use the on screen prompts to select your vehicle and select Submit. If are not able to select your vehicle, tap “My vehicle is not listed” and

Strany 227

3024. Once you have tapped Continue, you will see the following message while your key fob is being initialized. The configuration step can take

Strany 228 - About Section

3036. Once in the vehicle, tap Continue. Carefully follow the on screen instructions. You may be required to push buttons in your vehicle such as th

Strany 229

304Pair Smartphone Bluetooth® to ModuleThis feature lets you access the key fob functions on your Delphi Conncted Car smartphone app when within Bluet

Strany 230

3052. Tap Vehicle Settings.3. Tap the vehicle in which the module is currently installed.

Strany 231

3064. Tap Bluetooth Settings.

Strany 232 - MENU and Logout selection

3075. Tap Discover to activate Bluetooth® pairing.6. The Status LED on your module should begin flashing blue.7. Press your phone’s Home button and fol

Strany 233 - Using the iPhone App

308Authorize your smartphone’s Bluetooth® key fob functionality.1. Return to the Delphi Connect Car app. If your phone doesn’t appear on the list of B

Strany 234 - Tap Forgot Username

3093. Tap your phone’s name.

Strany 235

31Need help finding your vehicle’s OBD Connector port?1. After logging in for the first time, click the button labeled OBD LOCATOR. You will be pr

Strany 236

3104. Tap Authorize to enable your phone to provide key fob control over Bluetooth®. Your phone will now show as authorized.

Strany 237

3115. Return to the Delphi Connect side menu.

Strany 238

3126. Observe the LED on the module and wait until it returns to flashing blue every 10 seconds. 7. Tap the Key Fob menu item and test the buttons.Blue

Strany 239

313Remove the Bluetooth Connection to Your ModuleYou can remove the Bluetooth connection between your phone and your module.1. Access the Delphi Conn

Strany 240

3143. Tap Vehicle Settings.

Strany 241

3154. Tap the vehicle in which the module is currently installed.

Strany 242 - • The most recent alerts:

3165. Tap Bluetooth Settings.

Strany 243 - • The most recent trips:

3176. Tap the name of the device you wish to remove.

Strany 244

3187. Tap Unauthorize and then tap Unpair to remove the pairing for this device. The device will be removed from the list.Note: Remember to unpair t

Strany 245

319SettingsThe Settings menu provides access to your Account Settings, Vehicle Settings, your personal PIN-code, and additional information in the Abo

Strany 246

323. Complete your vehicle selections using the drop-downs for Make, Model, Year, Body Type and Trim as requested and then select Submit. I

Strany 247

320User SettingsAccount Email AddressThe account email is used to communicate information regarding your connected car account, for example the forgot

Strany 248

321Add Account Email AddressOn the side menu tap Settings, then Account Settings then User Settings then Enter Email Address.

Strany 249 - Map View

322Edit or Delete Account Email AddressTo edit or delete the account email address:On the side menu tap Settings, then Account Settings then User Sett

Strany 250 - View Geo-Fences

323Enter your new account email address or delete the current one by clearing the field. Tap Save Settings to save the email address or tap the Back bu

Strany 251 - Find My Car

324Change UsernameOn the side menu tap Settings, then Account Settings then User Settings then tap Username.

Strany 252 - Find All My Cars

325Usernames must be at least one character long, can include letters, numbers and special characters. The username may be composed only of letters if

Strany 253

326Change PasswordOn the side menu tap Settings, then Account Settings then User Settings then tap Password.

Strany 254

327You must enter the same password twice in order to change it. Passwords must be at least six characters long and include at least one number. Passw

Strany 255

328Vehicle Nicknames and DescriptionsYou can assign a nickname and a description to each vehicle. If defined, the nickname will be displayed instead of

Strany 256

329Modify Vehicle NicknameOn the side menu tap Settings, then vehicle settings, then tap the vehicle you wish to modify.

Strany 257 - 2. Tap CREATE NEW FENCE

334. A description of the location of your OBD II port will be given. Click “View a picture of your OBD II port” to view an actual photograph of

Strany 258

330Tap on Nickname to edit the vehicle nickname.

Strany 259

331Enter the desired nickname and press Save to save the nickname.Note: If you delete the nickname, the vehicle year and model will again be displayed

Strany 260 - saving

332Modify Vehicle DescriptionOn the side menu tap Settings, then vehicle settings, then tap the vehicle you wish to modify.

Strany 261

333Tap on Description to edit the vehicle description.

Strany 262 - location menu

334Enter the desired description and press Save to save the description.Note: If you delete the description, the vehicle VIN will again be displayed.

Strany 263

335Select Notification LanguageThe notification language setting allows you to receive your alert notifications, both email and txt messages, in any of t

Strany 264

336Tap Notification Language and select the desired language from the drop down list. Tap Save to save your selection.

Strany 265 - search again

337Select Unit of MeasureThe unit of measure setting allows you to view your data in either Imperial units, such as miles and mph, or metric units, su

Strany 266

338Tap Units of Measure and select desired system of measurement from the drop down list. Tap Save to save your selection.

Strany 267

339Module ManagementModule Management allows you to:• View the modules associated with your account• Add modules to your account• Remove modules from

Strany 268

34Note: If needed, you can access the OBD Locator from the website or the smartphone app. On the website, click on your username in the upper right-ha

Strany 269

340Add a Module to Your Account1. On the side menu tap Settings, then Account Settings then Module Management.

Strany 271

3423. Enter the ESN or IEMI and the device Registration Key exactly as they are printed on the module label — including the dash in the Registra

Strany 272

3434. If the module is still associated with another account, you will also need to enter the Username and Password of that account the

Strany 273

344Remove a Module from Your Account1. On the side menu tap Settings, then Account Settings then Module Management.

Strany 274 - without saving

3452. Tap the ESN or IEMI number of the module you want to remove.

Strany 275 - Delete an Existing Geo-Fence

3463. Review the on-screen information matches the module you want to remove and tap Delete Module.Note: Removing a module from your account does no

Strany 276

347Review Your Vehicle InformationTo review your vehicle information, tap Settings from the side menu then tap Vehicle Settings.Vehicle SettingsThe Ve

Strany 277

348Tap the vehicle you wish to review.

Strany 278 - Enable or Disable a Geo-Fence

349Edit Your Vehicle InformationIf your vehicle did not report a VIN, you can enter the VIN or information about your vehicle yourself.1. To edit your

Strany 279

35Helpful Installation Tips:• If the module seems to be difcult to insert, DO NOT FORCE IT. Remove the module and examine both connectors for any be

Strany 280

3502. Tap the vehicle you wish to review and then tap Edit.

Strany 281

3513. You can enter either the VIN from your vehicle or you can enter the vehicle make, model and model year. Tap the circle next to the informat

Strany 282

3524. Enter the VIN or use the drop-down menus to select your vehicle’s make, model and model year.5. Tap Save to save your changes or back to e

Strany 283

353Configuring AlertsThe Alerts settings allow you to customize some of the alerts available to you. All alerts will be stored in your vehicle’s cloud

Strany 284

3542. Tap the vehicle you wish to configure.

Strany 285 - Cancel to exit

3553. Tap Alerts & Notifications.

Strany 286

3564. Tap Geofence.

Strany 287

3575. To disable a specific Geo-Fence, tap the ON/OFF slider next to the Geo-Fence name. To re- enable the Geo-Fence tap the ON/OFF slider again.

Strany 288

3586. Tap the Geo-Fence name to configure the entry and exit alerts individually.

Strany 289

3597. To disable the entry alert, uncheck the box next to the words Trigger When Entered. To disable the exit alert, uncheck the box next to the

Strany 290

36Initiate Module SetupDo not proceed until the Status LED is solid blue, indicating activation on the Verizon network is complete.1. Insert your vehi

Strany 291

360Configuring the Speed Alert1. Tap Settings from the side menu then tap Vehicle Settings.

Strany 292

3612. Tap the vehicle you wish to configure.

Strany 293

3623. Tap Alerts & Notifications.

Strany 294

3634. To disable the speed alert, tap the ON/OFF slider to the right of the word Speed. The slider will change from ON to OFF. To re-enable the s

Strany 295

3645. Tap the word Speed to configure the speed threshold.

Strany 296

3656. Enter the speed in miles per hour that you want to trigger the speed alert. That is, when the vehicle is driven at this speed or higher for

Strany 297

366Configuring the Motion Alert1. Tap Settings from the side menu then tap Vehicle Settings.

Strany 298

3672. Tap the vehicle you wish to configure.

Strany 299

3683. Tap Alerts & Notifications.

Strany 300

3694. To disable the motion alert, tap the ON/OFF slider to the right of the word Speed. The slider will change from ON to OFF. To re-enable the

Strany 301

37Verify Module Setup1. Start the engine and let it run for at least 30 seconds.2. Stop the engine and wait at least 20 seconds. 3. You are now ready

Strany 302

3705. Tap the word Motion to configure the motion threshold.

Strany 303

3716. Enter the threshold in G-forces that you want to trigger the motion alert. That is, once the ignition of off for 10 minutes and the vehicle expe

Strany 304

372Configuring the Engine RPM Alert1. Tap Settings from the side menu then tap Vehicle Settings.

Strany 305 - 2. Tap Vehicle Settings

3732. Tap the vehicle you wish to configure.

Strany 306

3743. Tap Alerts & Notifications.

Strany 307

3754. To disable the engine RPM alert, tap the ON/OFF slider to the right of the words Engine RPM. The slider will change from ON to OFF. To re-

Strany 308

3765. Tap the words Engine RPM to configure the RPM threshold.

Strany 309

3776. Enter the engine RPM threshold in revolutions per minute and the minimum time required in seconds that you want to trigger the engine RPM

Strany 310

378Configuring NotificationsFor each alert, you can configure email and text notifications that will be sent when the alert occurs. This includes the abi

Strany 311

379Add a NotificationYou can add an email and text (SMS) notification to any alert. The process is similar for all alerts, here is how to add notificatio

Strany 312

38• If you still do not see the Dashboard screen, see the Troubleshooting section of this guide. Reconnect Your ModuleIf you are installing the modu

Strany 313 - 2. Tap Settings

3802. Tap the vehicle you wish to configure.

Strany 314

3813. Tap Alerts & Notifications.

Strany 315

3824. Tap the word Speed to configure the notifications.

Strany 316

3835. Tap Add Email at the bottom of the screen. If you do not see the button Add Email, tap the small down arrow to right of the word Notificatio

Strany 317

3846. Tap Add Notification7. To send a notifcation to an email address, select the email address icon and enter a valid email address in the format mye

Strany 318 - removed from the list

3858. To send a text notification to a mobile number, select the mobile number icon enter a valid 10 digit mobile number in the format 1112223333 using

Strany 319

386Delete a NotificationYou can delete a notification associated with any alert. The process is similar for all alerts, here is how to delete notificatio

Strany 320

3872. Tap the vehicle you wish to configure.

Strany 321 - Address

3883. Tap Alerts & Notifications.

Strany 322

3894. Tap the word Speed to configure the notifications.

Strany 323

39• There is only one orientation that the module will plug in. • Place two ngers behind the plug in your vehicle to prevent it from moving while p

Strany 324

3905. If you do not see the notification email addresses or mobile numbers displayed on the screen, tap the small down arrow to right of the word

Strany 325

3916. To delete a notification email address or mobile number, tap the x next to the email address or mobile number you want to delete. 7. Tap Save to

Strany 326

392Wi-Fi HotspotModel ACT233L of the Delphi Connected Car System offers you a mobile hotspot in your vehicle. The hotspot is enabled whenever the eng

Strany 327

393Tap Network Name to change the network name (SSID). This is the name that users will see when scanning for wireless networks on their devices. Ente

Strany 328

394View Connected DevicesFrom the Settings menu, tap Account Settings, Module Management, then tap the module you wish to configure. Tap on Connected D

Strany 329

395Configure the Network PasswordFrom the Settings menu, tap Account Settings, Module Management, then tap the module you wish to configure. Tap on Wi-F

Strany 330

396Tap Password to change the network password. Enter the new password in both boxes. The Wi-Fi password must be between 8 and 63 characters. Tap Sav

Strany 331

397Configure the Hotspot TimeoutsThe hotspot can be configured to remain on after the engine has been turned off. When the engine is turned off, the hot

Strany 332

398Tap the box indicating the Shut Off Time and Force Shut Off Time. Using the drop down menus, tap the desired time settings. Tap Save Settings to sa

Strany 333

399Wi-Fi Administrator Portal AccessYou can log in to the Wi-Fi hotspot using an administrator account while connected to the hotspot. The administrat

Strany 334

4 Change Username ...

Strany 335

402. Press and hold the Function Button on the side of the module until the Status LED blinks red one time. This will occur after approximately 5 se

Strany 336

400In order to view or modify any of the hotspot settings, you will need to sign in as the administra-tor. You can click the Sign In link in the upper

Strany 337

401View Hotspot Data Usage1. Log into the hotspot administrator portal. 2. Click Data Usage.

Strany 338

402View, Block and Unblock Connected Devices1. Log into the hotspot administrator portal. 2. Click on Connected Devices. To block a specific device fro

Strany 339

403Modify Administrator Password1. Log into the hotspot administrator portal.2. Click Hostpot Settings. Click the Hotspot tab. Click the Admin Passwor

Strany 340

404Modify Hotspot TimeoutThe hotspot can be configured to remain on after the engine has been turned off. When the engine is turned off, the hotspot wi

Strany 341

405Backup and Restore Hotspot SettingsSettings1. Log into the hotspot administrator portal.2. Click on Hostpot Settings. Click the Hotspot tab. Click

Strany 342

406Modify Basic Hotspot SettingsThe Wi-Fi hotspot settings allow you to configure the following settings:- Wi-Fi network name (SSID), name used by devi

Strany 343

4073. Edit the hotspot settings. 4. Click Save Changes.Modify Advanced Hotspot SettingsThe advanced hotspot settings allow you to configure the followi

Strany 344

4083. A warning message will be displayed. Click Go Back to exit Advanced Settings or click Continue.4. Click on Firewall to modify the firewall s

Strany 345

4095. Click on LAN to modify the LAN settings. Enter the desired IPv4 and IPv6 settings. Click Save Changes.6. Click on Port Filtering to modify the p

Strany 346 - Module

41Application & Service FeaturesUsing the Android AppForgot Username or PasswordShould you forget your account login credentials, you can request

Strany 347

410View Hotspot Support InformationThe hotspot provides status and diagnostic information as well as links to support services.1. Log into the hotspot

Strany 348

4113. To view the model and versions of the hotspot, click on About Delphi Connect. Click the Info tab.

Strany 349 - Edit Your Vehicle Information

4124. To view diagnostic information about the hotspot, click About Delphi Connect. Click on the Diagnostics tab.

Strany 350

4135. To manage hotspot log files, click About Delphi Connect. Click on the Logs tab. To enable recording hotspot logs, check Enable Logs. Select

Strany 351

4146. To view available support links, click About Delphi Connect. Click on the Help & Support tab.

Strany 352

415Personal PIN-CodeFor added security, you can create a personal PIN-code. Once created, the PIN must be entered each time you access the app except

Strany 353

416Enter a 4 digit PIN. You will be asked to re-enter the 4 digit PIN for confirmation.

Strany 354

417The PIN-code will now show ON.

Strany 355

418Disable Personal PIN-CodeOn the side menu tap Settings, then PIN-code.

Strany 356

419Enter your 4 digit PIN.

Strany 357

42Tap Forgot Username.Enter the account email address you provided in your User Settings and tap Submit. You will receive an email with your Username

Strany 358

420The PIN-code will now show OFF.

Strany 359

421About SectionThe About section allows you to:• Access the OBD Locator• Review the current Privacy Policy and Terms of UseLocating Your OBD Connecto

Strany 360

422Tap About and then tap OBD Locator.

Strany 361

423Reviewing the Terms of Use and Privacy PolicyTo review the Terms of Use and Privacy Policy, on the side menu tap Settings.

Strany 362

424Tap About and then tap the document you with to review.

Strany 363

425LogoutOn the Side Menu of the app, tap Log Out to logout from your vehicle. This will return you to the login screen.Note: The Delphi Connect smart

Strany 364

426Using the Delphi Connect WebsiteAccessing the WebsiteYou can log in to your vehicle at mycar.delphi.com. Forgot Username or PasswordShould you forg

Strany 365

427Enter the account email address you provided in your User Settings and click Send Email.

Strany 366

428You will receive an email with your Username sent to the account email address you provided as part of your User Settings. If you did not provide a

Strany 367

429Enter your Username and click SEND EMAIL. You will receive an email providing you a temporary password sent to the account email address you provi

Strany 368

43To request a Password reset, tap Forgot Username or Password?Tap Forgot Password.

Strany 369

430Navigating AroundTo navigate to a specific category, click on the links at the top of the screen for Dashboard, Location, Alerts, Health, Recent Tr

Strany 370

431Selecting Your VehicleIf you have more than one module associated with your account, you can select which vehicle’s information to view.Click on th

Strany 371

432Click on the vehicle you wish to view or click on the up arrow to keep viewing the current vehicle. Note: The last vehicle that recorded data is in

Strany 372

433If there are more than 6 vehicles to choose from you can page through the list of all vehicles using the right arrow.

Strany 373

434Vehicle SettingsThe Vehicle Settings allow you to edit your vehicle information, such as providing your vehicle VIN when the VIN is not available.E

Strany 374

435Click the circle next to the information you want to provide.

Strany 375

436Enter the VIN or use the drop-down menus to select your vehicle’s make, model and model year.Click Save to save your changes or Cancel to exit with

Strany 376

437Vehicle Nicknames and DescriptionsYou can assign a nickname and a description to each vehicle. If defined, the nickname will be displayed instead of

Strany 377

438Modify Vehicle NicknameSelect the vehicle you want to modify from the dropdown at the top of the screen. Click on the vehicle name at the top of th

Strany 378

439If your vehicle has reported the VIN, you will see the following pop-up window and it will already contain vehicle information. Click Edit. If your

Strany 379

44You will receive an email providing you a temporary password sent to the account email address you provided as part of your User Settings. Use this

Strany 380

440Edit the nickname and description. If your vehicle has not reported the VIN, you can also enter your vehicle information at this time or leave it b

Strany 381

441Username MenuTo access your username menu, click on your username in the upper right-hand corner. From this drop-down, you can access your user set

Strany 382

442Refreshing Your Vehicle DataWhenever you load a new page of information, the latest available vehicle data will be displayed. In addition, from any

Strany 383

443Once the vehicle is contacted, you will see the following message.Select Dismiss to return to the website. The refresh process will continue in the

Strany 384

444• Last recorded Location of vehicle:• The most recent alerts:

Strany 385

445• The most recent diagnostic information reported by your vehicle:• The most recent trips:Note: You will only see Health information if your vehicl

Strany 386

446• Status of the Wi-Fi Hotspot, the Wi-Fi icon will be colored blue when the hotspot is on and grey when it is off:LocationUse the Location feat

Strany 387

447Depending on zoom level, all vehicles may not be visible on the main map. The mini map shows the locations of all vehicles selected for display. Ve

Strany 388

448Click on a vehicle marker to select it and display additional information such as the address. The marker of the selected vehicle will darken sligh

Strany 389

449If you have selected a vehicle to show on the map and the location is unknown, a message will be displayed at the top of the map indicating how man

Strany 390

45Navigating AroundTo navigate to a specific category, tap the item you want to view, such as Alerts, Recent Trips, Health and Location (as shown in th

Strany 391

450Hide/Show Vehicles on the Location MapOn the location screen, you can select which of your vehicles you wish to display on the map using the Hide

Strany 392

451Check the vehicles you wish to show in the location map. You cannot uncheck the current vehicle. Click Select Current Vehicle Only to display only

Strany 393

452Find My CarClick the Zoom to Vehicle button to center the map on the current vehicle’s location.

Strany 394

453Find All My CarsClick the Zoom to All Vehicles button to resize the map to show all vehicles selected for display.

Strany 395

454Map ViewThe map view can be customized using the the standard map controls, such as scrolling and zooming to adjust the Map view.

Strany 396

455Programmable OdometerA programmable odometer is provided for your vehicle. You can set it to your vehicle’s odometer to track total mileage or you

Strany 397

456Enter the desired value in miles. Tap Submit to save the value or Cancel to exit without saving.

Strany 398

457Managing Geo-FencesA geo-fence allows you to define a location that is of interest to you and create a boundary around it. When your vehicle crosses

Strany 399

4582. In the GEO FENCES window, click CREATE NEW FENCE.

Strany 400

4593. Scroll and zoom the map to where you would like to place the Geo-Fence and tap DROP PIN HERE.

Strany 401

46• From the Side Menu, you can navigate to any of the Delphi Connect features. • Open the Settings feature to modify account information, manage your

Strany 402

4604. Follow the on-screen instructions to locate, resize and name your Geo-Fence. Use the icons in the upper right corner of the map to change the sh

Strany 403

461Create a Geo-Fence by Searching for an Address or Business Name1. Click the Geo Fence button in the Location view to begin managing Geo Fences. 2.

Strany 404

4623. Click ENTER ADDRESS.

Strany 405

4634. Enter the address or business name you want to find and click VIEW RESULTS

Strany 406

4645. Scroll through the list of search results. You can modify the search criteria and click VIEW RESULTS to refresh the results. Within the se

Strany 407

4656. Follow the on-screen instructions to locate and size the Geo-Fence. Use the icons in the upper right corner of the map to change the shape of th

Strany 408

466Edit an existing Geo-Fence1. Click the Geo Fence button in the Location view to begin managing Geo-Fences.2. Click on the name of the Geo-Fence you

Strany 409

4673. Follow the on-screen instructions to locate, resize and rename your Geo-Fence. You can hide the Geo-Fence panel to see more of the map by clicki

Strany 410

4682. Click on the name of the Geo-Fence you want to edit. The map will center on that Geo-Fence. Click on the arrow next to the Geo-Fence you want to

Strany 411

469Enable or Disable a Geo-Fence1. Click the Geo-Fence button in the Location view to begin managing Geo-Fences

Strany 412

47Refreshing Your Vehicle DataThe Delphi Connect system will update your vehicle information as it becomes available. This may cause the display to ch

Strany 413

4702. In the GEO FENCES window, click the checkbox to the left of the Geo-Fence you wish to disable.The checkmark will be cleared and the Geo-Fence w

Strany 414

4713. To enable a Geo-Fence, check the box to the left of the Geo-Fence name.The Geo-Fence will be shown on the map again and alerts will again be gen

Strany 415

472Live TrackingLive tracking provides you the ability to track your vehicle in real time using the website. Click on the Live Tracking icon to start

Strany 416

4733. You will see the following message once the vehicle is connected. Select Cancel to return to the Location view.4. If the vehicle cannot be reach

Strany 417

4745. During live tracking, the vehicle marker will be red. To view the vehicle speed and the live tracking timer, click on the vehicle marker. To clo

Strany 418

475You can also configure email and text message notifications for each alert. For more information on configuring your alerts and the associated notific

Strany 419

476To clear all alerts, do not select any alerts and press CLEAR ALL. You will be asked to confirm your desire to clear all alerts.HealthThe Health fea

Strany 420

477Performing a Diagnostic Code Scan on Your VehicleTo perform a diagnostic scan of your vehicle, navigate to the Health screen and click the Refresh

Strany 421

478Once the scan is complete, the diagnostic codes reported by your vehicle will be displayed on the screen. Use the navigation buttons to scroll thro

Strany 422

479To begin clearing codes, tap CLEAR ALL.Tap Display to clear the codes from your display, tap Vehicle to clear the codes from your vehicle, or tap C

Strany 423

48Selecting Your VehicleIf you have more than one module associated with your account, you can select which vehicle’s information to view. Tap your ve

Strany 424

480Recent TripsThe Recent Trips feature displays all the trips the vehicle has taken since you installed the module. The most recent trip is listed fir

Strany 425 - Log Out selection

481Key Fob PairingThe key fob setup process has two main steps, configuring your module for your vehicle and pairing your module with your vehicle. You

Strany 426 - Logout feature

482Before attempting the key fob pairing process, look on your dashboard view to see if your vehicle’s VIN has been identified. If the module was able

Strany 427

4832. Using the Prev and Next buttons, look for the fob picture that matches your key fob. Once you have found your key fob, click Continue. If

Strany 428

4844. When complete, the following screen will be displayed and you will need to be in the vehicle to perform the final key fob set up step. If y

Strany 429

485Key Fob Setup without VIN1.To enable your keyfob feature without a vehicle VIN, navigate to the KEY FOB tab. If your key fob is not already se

Strany 430

4863. Using the Prev and Next buttons, look for the fob picture that matches your key fob. Once you have found your key fob, click Continue. If you do

Strany 431

4874. When complete, the following screen will be displayed and you will need to be in the vehicle to perform the final key fob set up step. If y

Strany 432

488Username MenuTo access your username menu, click on your username in the upper right-hand corner. From this drop-down, you can access your user set

Strany 433

489User Settings, Notification Language and Units of Measure To access your user settings, click on your username in the upper right-hand corner. From

Strany 434

49DashboardThe Dashboard provides a summary of your vehicle status.It includes the following information.• Basic vehicle information including the eng

Strany 435

490To change your password, enter your current password in the box labeled “Password” and the new password in both the “New Password” and “Conrm new

Strany 436

491SettingsThe Settings menu allows you to manage your modules and Alerts and Notifications Settings.Module ManagementModule Management allows you to:•

Strany 437

492View Modules Associated with Your AccountOn the Settings menu select MANAGE MODULES. You will see all the modules currently associated with your a

Strany 438

493Add a Module to Your Account1. On the Settings menu select MANAGE MODULES.

Strany 439

4942. Click Add Module3. Enter the ESN or IEMI and the device Registration Key exactly as they are printed on the module label — including the d

Strany 440

4954. If the module is still associated with another account, you will also need to enter the Username and Password of that account then click Su

Strany 441 - Username Menu

496Note: Any vehicle data in the previous account will not be transferred to the new account. Once added to the new account, all vehicle data reported

Strany 442

4972. Click the trash can icon next tp the ESN or IEMI number of the module you want to remove.Note: Removing a module from your account does not deac

Strany 443 - Battery Voltage

498Configuring AlertsThe Alerts settings allow you to customize some of the alerts available to you. All alerts will be stored in your vehicle’s cloud

Strany 444

4992. Click GeoFences.3. To disable a specific Geo-Fence, click the checkbox next to the Geo-Fence you wish to dis-able. The checkmark will be cl

Strany 445

5 Modify Hotspot Timeout ...211

Strany 446

50• Last recorded location of vehicle: • The most recent alerts:

Strany 447

5004. Click the Geo-Fence name to configure the entry and exit alerts individually.5. To disable the entry alert, uncheck the box next to the words Tri

Strany 448

5016. Click Save to save your changes or click the Back button or the side menu button to exit without saving your changes.See Configuring Notifica

Strany 449

502Configuring the Speed Alert1. On the Settings menu select MANAGE ALERTS.2. To disable the speed alert, click the checkbox next to the word Speed. Th

Strany 450

5033. To enable the speed alert, click the checkbox. The checkmark will be added. 4. Click the word Speed to configure the speed threshold.

Strany 451

5045. Enter the speed in miles per hour that you want to trigger the speed alert. That is, when the vehicle is driven at this speed or higher for

Strany 452

505Configuring the Motion Alert1. On the Settings menu select MANAGE ALERTS.2. To disable the motion alert, click the checkbox next to the word Motion.

Strany 453

5063. Enter the threshold in G-forces that you want to trigger the motion alert. That is, once the ignition of off for 10 minutes and the vehic

Strany 454

507Configuring the Engine RPM Alert1. On the Settings menu select MANAGE ALERTS. 2. To disable the engine RPM alert, click the checkbox next to the wor

Strany 455

5083. Click the words Engine RPM to configure the RPM threshold.4. Enter the engine RPM threshold in revolutions per minute and the minimum time requir

Strany 456

509Configuring NotificationsFor each alert, you can configure email and text notifications that will be sent when the alert occurs. This includes the ab

Strany 457

51• The most recent health information reported by your vehicle: • The most recent trips:Note: You will only see Health information if your vehicle ha

Strany 458

5102. Click the word Speed to configure the notifications.3. Click Add new notification.

Strany 459 - HERE

5114. Select Email for the notification type. 5. Enter a valid email address in the format [email protected] and click Save. Click Cancel to exi

Strany 460

512Delete a Notification Email AddressYou can delete an email notification associated with any alert. The process is similar for all alerts, here is how

Strany 461

5133. To delete a notification email address, click the x next to the email address. 4. You will be asked to confirm you want to delete the email. Click

Strany 462 - 3. Click ENTER ADDRESS

514Add a Notification Text NumberYou can add a text notification to any alert. The process is similar for all alerts, here is how to add one to the spee

Strany 463

5153. Click Add new notification. 4. Select Text for the notification type.

Strany 464

516Enter a valid 10 digit mobile number in the format 1112223333 using only numbers and no other characters. To enter additional mobile numbers, click

Strany 465

517Delete a Notification Text NumberYou can delete a text notification mobile number associated with any alert. The process is similar for all alerts, h

Strany 466 - Edit an existing Geo-Fence

5183. To delete a notification mobile number, click the x next to the mobile number.

Strany 467

519Wi-Fi HotspotModel ACT233L of the Delphi Connect system offers you a mobile hotspot in your vehicle. The hotspot is enabled whenever the engine is

Strany 468 - 3. Click Delete

52LocationUse the Location feature to locate your vehicles at any time. The location screen indicates the last recorded vehicle locations. The current

Strany 469

520Enter a new Network Name to change the network name (SSID). This is the name that users will see when scanning for wireless networks on their devic

Strany 470

521Enter the new password twice. The Wi-Fi password must be between 8 and 63 characters. Click Update to save your changes or click the X to the right

Strany 471 - Geo-Fence

522The hotspot can be configured to remain on after the engine has been turned off. When the engine is turned off, the hotspot will remain on for a pro

Strany 472

523Click Update to save your changes or click the X to the right to exit without saving.

Strany 473

524View Wi-Fi Connected DevicesOn the Settings menu select MANAGE MODULES. Click the Wi-Fi icon next to the module you wish to configure.

Strany 474

525Log Out Mobile DeviceIf you misplace or lose your mobile phone, you can use the Force Logout feature to remotely log out the phone from your Delphi

Strany 475

526Wi-Fi Administrator Portal AccessYou can log in to the Wi-Fi hotspot using an administrator account while connected to the hotspot. The administrat

Strany 476

527In order to view or modify any of the hotspot settings, you will need to sign in as the administra-tor. You can click the Sign In link in the upper

Strany 477

528View Hotspot Data Usage1. Log into the hotspot administrator portal. 2. Click Data Usage.

Strany 478

529View, Block and Unblock Connected Devices1. Log into the hotspot administrator portal. 2. Click on Connected Devices. To block a specific device fro

Strany 479

53Tap on a vehicle marker to select it and display additional information such as the location ad-dress and the latitude and longitude. The marker of

Strany 480

530Modify Administrator Password1. Log into the hotspot administrator portal.2. Click Hostpot Settings. Click the Hotspot tab. Click the Admin Passwor

Strany 481

531Modify Hotspot TimeoutThe hotspot can be configured to remain on after the engine has been turned off. When the engine is turned off, the hotspot wi

Strany 482

532Backup and Restore Hotspot SettingsSettings1. Log into the hotspot administrator portal.2. Click on Hostpot Settings. Click the Hotspot tab. Click

Strany 483

533Modify Basic Hotspot SettingsThe Wi-Fi hotspot settings allow you to configure the following settings:- Wi-Fi network name (SSID), name used by devi

Strany 484

5343. Edit the hotspot settings. 4. Click Save Changes.Modify Advanced Hotspot SettingsThe advanced hotspot settings allow you to configure the followi

Strany 485

5353. A warning message will be displayed. Click Go Back to exit Advanced Settings or click Continue.4. Click on Firewall to modify the firewall s

Strany 486

5365. Click on LAN to modify the LAN settings. Enter the desired IPv4 and IPv6 settings. Click Save Changes.6. Click on Port Filtering to modify the p

Strany 487

537View Hotspot Support InformationThe hotspot provides status and diagnostic information as well as links to support services.1. Log into the hotspot

Strany 488

5383. To view the model and versions of the hotspot, click on About Delphi Connect. Click the Info tab.

Strany 489

5394. To view diagnostic information about the hotspot, click About Delphi Connect. Click on the Diagnostics tab.

Strany 490

54If you have selected a vehicle to show and the location is unknown, a message will be displayed at the top of the map indicating how many vehicle lo

Strany 491

5405. To manage hotspot log files, click About Delphi Connect. Click on the Logs tab. To enable recording hotspot logs, check Enable Logs. Select

Strany 492

5416. To view available support links, click About Delphi Connect. Click on the Help & Support tab.

Strany 493

542Frequently Asked Questions1. What are the extension cable and cradle mount for?The relocation kit, which includes the extension cable and cradle, w

Strany 494 - 2. Click Add Module

543may actually be going just under the speed the speedometer indicates. To see the alert in the mobile apps or website, you may need to refresh the d

Strany 495 - adding the Module

544email, you need to ensure your email address is entered correctly in the settings area for email.10. Why do I see multiple geo-fence alerts at abou

Strany 496

545limited to the following list of characters: ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklm-nopqrstuvwxyz0123456789 -_!?()@#$*&.,15. What if I forget

Strany 497

54621. How many mobile devices or PCs can be logged on to the same account?There is no limit on how many phones and/or PCs can be logged into the same

Strany 498

54728. Why doesn’t my VIN or my make, model and year of my vehicle show up on my Dashboard page?Not all vehicles report VIN to the module. Fo

Strany 499

54835. Does the module impact my gas mileage? The module has no impact on your vehicle’s gas mileage.36. Why don’t I see the right vehicle at the top

Strany 500

54940. I setup the key fob feature with my vehicle and now my factory Key Fob doesn’t work. Why?During key fob setup, the step where your factory key

Strany 501

55Hide/Show Vehicles on the Location MapOn the location screen, you can select which of your vehicles you wish to display on the map using the Hide o

Strany 502 - cleared

550to cancel the Live Tracking mode. You can continue to Live Track an unlimited number of times after a timeout.46. I was tracking a vehicle and it s

Strany 503

551extension cable may be necessary to relocate the module to a better location for GPS reception.52. I don’t see all my vehicles on the map?On the d

Strany 504

552the odometer to match their vehicle’s odometer for total mileage or use it as a trip odometer by setting it to zero before each trip.58. Why can’t

Strany 505

55363. Why do the lights on the module change color while I drive?The module status LED indicates data transmission which is fully explained in the in

Strany 506

554pull uniformly outward away from the vehicle OBDII connector. Note that the module is designed for a snug fit and may require a strong pull to full

Strany 507

55575. Will using this product void my new car warranty?Delphi stands behind the Delphi Connect product and maintains that it does not void your new c

Strany 508

55679. I don’t see all my vehicles on the map?On the dashboard, only the current vehicle will be displayed on the small location map. On the Location

Strany 509

55785. How do I activate my Hotspot?The Wi-Fi hotspot is enabled prior to purchase.86. How do I change my login information for my hotspot connection?

Strany 510

558Status LED and TroubleshootingUnderstanding the Status LED IndicatorsStatus LED Status (Engine On)Status (Engine Off)No illumination for more tha

Strany 511

559Solid or blinking yellowOn Roaming network• Idle/dormant (3 blinks every 30 seconds)• Ready, no data activity (solid yellow)• Data activity (bli

Strany 512

56Check the vehicles you wish to show in the location map. You cannot uncheck the current vehicle. Tap Select Current Vehicle Only to display only th

Strany 513

560TroubleshootingIssue Likely Cause(s) Corrective Action(s)Can’t login to my accountIncorrect username or password entryFirst-time: Enter Registratio

Strany 514

561No LED illuminationDelphi Connect system is in deep sleepStart engine, wait up to 10 seconds for LED to illuminate any colorNo power at OBD portChe

Strany 515

562LED remains solid blueDevice can’t complete vehicle setupCheck all OBD port connectors on Delphi Connect system and on vehicle for dirty/corroded p

Strany 516

563No green LED with engine running, LED flashes blue every 10 secondsEngine start wasn’t detectedTurn off ignition, wait 10 seconds and restart engine

Strany 517

564Can’t get to Key Fob setup pageNo Internet connection to smartphone or computerCheck your Internet connectionCloud server problemWait a few minutes

Strany 518

565Can’t get Delphi Connect system Key Fob to control vehicle keyless entry systemNot paired See “Can’t get Delphi Connect system key fob to pair wit

Strany 519

566Can’t pair my smartphone to Delphi Connect system with Bluetooth®Incompatible smartphoneMust be iPhone with iOS 5.0 or later or Android 2.2 or late

Strany 520

567Customer InformationYour Wireless Device and Third Party Services Verizon Wireless is the mobile carrier associated with this wireless product. How

Strany 521

568Product Safety and WarrantyHealth and SafetyThis section outlines the safety precautions associated with using Vehicle Diagnostics. The term “mobi

Strany 522

569• DO NOT expose this equipment to rain or spilled beverages.• DO NOT use unauthorized accessories.GPS & AGPSYou mobile device uses a Global Pos

Strany 523

57Map ViewThe Map view can be customized using the map controls. You can use the standard Android map controls, such as scrolling and zooming to adjus

Strany 524 - View Wi-Fi Connected Devices

570(2) This device must accept any interference received. Including interference that may cause undesired operation.INFORMATION TO THE USERThis equipm

Strany 525

571This Warranty does not apply to:(a) Product subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misu

Strany 526

572Therefore, we strongly recommend you make a back up copy of all data and software contained on your Product before submitting it for repair or ser

Strany 527

573THE COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF USE DURING THE TIME THE PRODUCT IS BEING REPAIR

Strany 529

OM231VW v.00

Strany 530

58View Geo-Fences To enable and disable the display of Geo-Fences, select Geo-Fences on the location menu. You will see the geo-fences associated with

Strany 531

59Find My CarOn the location menu, tap Zoom to Vehicle to center the map on the current vehicle’s location. Soft MenuAndroid soft menu

Strany 532

6 Alerts ...

Strany 533

60Find All My CarsOn the location menu, tap Zoom to All Vehicles to resize the map to show all vehicles selected for display.

Strany 534

61Navigate to VehicleIf the GPS is enabled on your smartphone, you can have your default navigation app provide directions from your location to your

Strany 535

62Programmable OdometerA programmable odometer is provided for your vehicle. You can set it to your vehicle’s odometer to track total mileage or you c

Strany 536

63Enter the desired value in miles. Tap Save to save the value or tap back to exit without saving.

Strany 537

64Managing Geo-FencesA Geo-Fence allows you to define a location that is of interest to you and create a boundary around it. When your vehicle crosses

Strany 538

652. In the Geo-Fences settings panel, tap CREATE NEW FENCE.

Strany 539

663. Select the desired geo-fence shape, circle or rectangle. You can change the shape at anytime.4. Scroll and zoom the map to where you would like t

Strany 540

675. To resize the geo-fence, tap Resize Shape on the soft menu and use the handles to change the shape of the geo-fence boundaries. Tap the che

Strany 541

686. Tap the Save icon (upper right hand corner) to save your geo-fence.7. Enter the name of the new geo-fence and tap OK, or tap Cancel to exit witho

Strany 542 - Frequently Asked Questions

698. Create additional Geo-Fences as desired. 9. Tap the Back button or Side Menu button when you are finished to return to Location view.

Strany 543

7 Configuring the Speed Alert ...360 C

Strany 544

70Create a Geo-Fence by Searching for an Address or Business Name1. While in Location view, tap Add or Edit Geo-Fence on the soft menu to begin managi

Strany 545

712. In the Geo-Fences settings panel, tap CREATE NEW FENCE.

Strany 546

723. Tap Search on the soft menu.

Strany 547

734. Enter the address or business name you want to find and tap the search icon (magnifying glass)

Strany 548

745. Scroll through the list of search results. You can modify the search criteria and tap the search icon (magnifying glass) to refresh the res

Strany 549

756. Select the desired geo-fence shape, circle or rectangle. You can change the shape at anytime.

Strany 550

767. To resize the geo-fence, tap Resize Shape on the soft menu and use the handles to change the shape of the geo-fence boundaries. Tap the che

Strany 551

778. Tap the Save icon (upper right hand corner) to save your geo-fence.9. The search text you used will be automatically entered as the geo-fence nam

Strany 552

78Edit an Existing Geo-Fence1. While in Location view, tap Add or Edit Geo-Fence on the soft menu to begin managing Geo-Fences.

Strany 553

792. Tap the pencil icon to the right of the name of the Geo-Fence you want to edit.

Strany 554

8 Selecting Your Vehicle ...

Strany 555

803. Select the desired geo-fence shape, circle or rectangle. You can change the shape at anytime.

Strany 556

814. Scroll and zoom the map to where you would like to place the geo-fence. The cross-hairs indicate the center of the geo-fence.5. To resize the geo

Strany 557

826. Tap the Save icon (upper right hand corner) to save your geo-fence.7. Edit the name of the new geo-fence if needed and tap OK, or tap Cancel to e

Strany 558

83Delete an Existing Geo-Fence1. While in Location view, tap Add or Edit Geo-Fence on the soft menu to begin managing Geo-Fences.

Strany 559

842. Tap the pencil icon to the right of the name of the Geo-Fence you want to delete.

Strany 560

853. On the soft menu tap Delete, then tap OK to delete or Cancel to exit without deleting.

Strany 561

86Enable or Disable a Geo-Fence1. While in Location view, tap Add or Edit Geo-Fence on the soft menu to begin managing Geo-Fences.

Strany 562

872. In the Geo-Fence settings panel, tap the checkbox to the left of the Geo-Fence you wish to disable.

Strany 563

883. The checkmark will be cleared and the Geo-Fence will no longer be visible on the map. This will not delete the Geo-Fence, but alerts will n

Strany 564

894. To enable a Geo-Fence, tap the box to the left of the Geo-Fence name. The Geo-Fence will be shown on the map again.

Strany 565

9 Settings ...

Strany 566

90Live TrackingLive tracking provides you the ability to track your vehicle in real time using the Delphi Con-nected Car smartphone app or the Delphi

Strany 567 - Customer Information

911. While in Location view, tap Live Tracking on the location menu to start the live tracking feature.Note: While in Location view, depending on your

Strany 568 - Product Safety and Warranty

922. You will be see a warning message with a reminder of the 10-minute timeout. To continue, tap OK. To exit live tracking, tap Cancel. If you do not

Strany 569

933. During Live Tracking, the live tracking icon will be red and the vehicle marker will turn red. The vehicle’s current speed as well as the live t

Strany 570

94AlertsThe Delphi Connect application will notify you with alerts of specific vehicle behaviors. Current alerts include the following:• Vehicle speed

Strany 571

95Within the smartphone app, you can scroll to view all of your Alerts. The most recent Alert appears first.

Strany 572

96Clearing AlertsTo clear alerts, tap the box next to the alerts you wish to clear and tap Clear. The smartphone app only displays the most recent ale

Strany 573

97You will need to confirm that you wish to clear the selected alerts. Tap OK to confirm, or tap Cancel to exit.

Strany 574

98HealthThe Health feature displays a history of vehicle diagnostic codes, often called trouble codes, which you have read from your vehicle. If the C

Strany 575 - OM231VW v.00

99Performing a Diagnostic Code Scan on Your VehicleTo begin a diagnostic scan, tap the soft menu at the bottom of the screen. Then tap Perform trouble

Komentáře k této Příručce

Žádné komentáře